ServoLock

Servolock is used for mounting servos onto the main aerofoil with puting servo side onto the aerofoil inner surface. It is very convenient, because the servo is easily reliesed out, when the linkage is adjusted or the servo is replaced. The servolocks are dedicated to the paticular servo products, as the following table shows. Those are avilable from MIBO MODELI d.o.o., Slovenia . The type number of servo Is listed using SLOVENIA name or type number. Please pay attention to the exact product number in your countries.

Applicable Servo
Servolock
EXAMPLES

IDS for JR DS181 (Graupner DS3288)

with servolock

 

IDS for KST
(DS125MG, DS135MG
DS225MG,X10,X10mini)

with servolock

IDS for FUTABA
(S3150)

with servolock

ST X06H
(Horizontal)
   

KST X08H
(Horizontal)

 

KST X08H Larger
(horizontal)

KST X08 Larger
(Vertical)

 
MKS DS6125
(KST DS125MG)

KST DS125MG:
Modulation: Digital
Torque: 4.8V: 6.0 (kg cm) / 6.0V: 7.0 (kg cm)
Speed: 4.8V: 0.15 sec/60° / 6.0V: 0.12 sec/60°
Weight 27.5 g 0.97 oz
Dimensions 30 x 10 x 35.5 mm
Motor Type: DC motor
Gear Type: Bronze
Rotation/Support: Dual bearings

MKS DS6125:
Modulation: Digital
Torque: 4.8V:6.60 (kg-cm) / 6.0V:8.20 (kg-cm)
Speed: 4.8V:0.15 sec/60° / 6.0V:0.12 sec/60°
Weight: 28.8 g
Dimensions: 30.0 x 10.0 x 35.5 mm
Motor Type: Coreless
Gear Type: Titanium
Rotation/Support: Dual Bearings
MKS DS6125 Bearing    
KST DS125MG Bearing  
MKS DS6125Mini
(KST DS135MG)
KST DS135MG:
Modulation: Digital
Torque: 4.8V:4.30 (kg-cm) / 6.0V:5.20 kg-cm)
Speed: 4.8V:0.12 sec/60°/ 6.0V:0.10 sec/60°
Weight: 23.0 g
Dimensions: 30 x 10 x 30 mm
Motor Type: DC Motor
Gear Type: Bronze
Rotation/Support: Dual Bearings

MKS DS6125mini:
Modulation: Digital
Torque: 4.8V:4.80 (kg-cm) / 6.0V:5.80 kg-cm)
Speed: 4.8V:0.12 sec/60° / 6.0V:0.10 sec/60°
Weight: 25.3 g
Dimensions: 30.0 x 10.0 x 29.9 mm
Motor Type: Coreless
Gear Type: Titanium
Rotation/Support: Dual Bearings

MKS DS6125Mini
Bearing
 
KST DS135MG Bearing    

MKS DS6100
Bearing

 

JR DS181
Bearing

 
JR DS181(DS3288)

 

Futaba S3173SVi There is no servolock dedicated for Futaba S3173 Svi. the wall must be cut for the connector at the bottom of servo.  
Robbe JR DS362 Servolock for DS362

JR DS181
Bearing

 
KST MS320    
FUTABA S3150      
Hitec HS-5085MG
Hitec HS-5085MG is a Digital Mighty Micro BB MG Servo that is a servo made by Hitec using brass metal gear. It suits for flap servo, because the metal gear is used and the range of rotating angle is a little wider . Therefore Butterfully would be steeper.
   
JR DS3210
HITEC HS125 /5125


(1)Aplicable Wing Span;
- wing span is 2.5m-3m long.
(2)Example of Applical models
- VICTOR, ARIS other F3B models

RDEC C261, C271

(1)Applicable Wings Span:
- Wing span is 1.5m long.

(2)Applicable models :
- Radina DX (ALEX1.5m)
- other 1.5-2.0m class models